What does error code F3 mean on a GE Appliances oven?

Oven temperature sensor fault. F3 and F4 usually mean the oven temperature sensor needs to be replaced.

Can I fix GE Appliances code F3 myself?

Start with these safe checks: Turn the oven off at the circuit breaker for a minute or two, then back on, to see if the code clears. Sensor replacement is for a trained technician. GE recommends leaving the oven off at the breaker until it's serviced.

When should I call a technician for code F3?

Sensor replacement is for a trained technician. GE recommends leaving the oven off at the breaker until it's serviced. Unplug it or switch the breaker off before you remove any panel. Don't test or replace wiring, control boards, heating elements or motors under power. If you see scorching, smell burning, or the breaker trips again, leave it off and call a qualified appliance technician or electrician.

GE Appliances Oven Error Code F3 / F4: Oven temperature sensor fault

What F3 means

F3 and F4 usually mean the oven temperature sensor needs to be replaced.

Also shown as: F4, depending on the model.

Likely causes

Failed oven sensor
Sensor wiring fault

Safe first checks

Turn the oven off at the circuit breaker for a minute or two, then back on, to see if the code clears.

When to stop

Sensor replacement is for a trained technician. GE recommends leaving the oven off at the breaker until it's serviced.

Parts that may help

Only order a part once the checks above point to it, and match the part number to your model.

Sundance/Jacuzzi 3-Pin Temperature Sensor, 12 ft Cable – 6600-751$59.99

Checked against: GE Appliances: Range & Wall Oven - Oven Error, Fault or Function Codes. Codes can differ by model and year, so confirm with your owner's manual.