Can I fix Balboa code Sensors out of sync myself?

Start with these safe checks: Wait a few minutes to see if M015 clears. Balboa says call for service if it doesn't clear, and always for M026.

When should I call a technician for code Sensors out of sync?

Balboa says call for service if it doesn't clear, and always for M026. Water and electricity together can kill. Turn the equipment off at the breaker before you open anything, never touch equipment while standing in water, and stay out of the pool or spa if you feel tingling or suspect an electrical problem. Leave wiring, boards and GFCI faults to a licensed electrician or service tech.

Balboa Hot Tub Error Code Sensors out of sync / M026 / M015:…

What Sensors out of sync means

The temperature sensors are out of sync (M015: off by about 3°F; M026: out of sync for at least an hour).

Also shown as: M026, M015, depending on the model.

Likely causes

Sensor fault

Safe first checks

Wait a few minutes to see if M015 clears.

When to stop

Balboa says call for service if it doesn't clear, and always for M026.

Parts that may help

Only order a part once the checks above point to it, and match the part number to your model.

Sundance/Jacuzzi 3-Pin Temperature Sensor, 12 ft Cable – 6600-751$59.99

Checked against: Balboa TP500S / TP600 system user guide (42339 rev A1): message codes; Balboa Spa Touch 3 user guide: messages. Codes can differ by model and year, so confirm with your owner's manual.