Can I fix Heat & Glo code 3 flashes myself?

Start with these safe checks: Make sure the gas supply is fully on and, for propane, the tank has fuel. Lead and sensor checks are for a qualified tech.

When should I call a technician for code 3 flashes?

Lead and sensor checks are for a qualified tech. Smell gas? Leave right away, don't touch light switches or phones inside, and call your gas utility or 911 from outside. Never open a gas valve, burner, gas line, vent or flue connection, or bypass a safety switch. Repeated lockouts, scorching, soot, or a CO alarm mean shut it off and call a licensed gas technician.

Heat & Glo Gas Fireplace Error Code 3 flashes / IPI 3 flashes:…

What 3 flashes means

The pilot sparks and may light for up to 60 seconds, but the main valve won't open: low gas supply, a false flame signal, or a shorted or disconnected sensor or igniter lead.

Also shown as: IPI 3 flashes, depending on the model.

Likely causes

Low gas supply
Sensor or igniter lead problem

Safe first checks

Make sure the gas supply is fully on and, for propane, the tank has fuel.

When to stop

Lead and sensor checks are for a qualified tech.

Checked against: Hearth & Home Technologies, IntelliFire Plus troubleshooting guide. Codes can differ by model and year, so confirm with your owner's manual.