What does error code FH mean on a Whirlpool washer?

No water supply. There's a water inlet problem: no water or not enough water.

Can I fix Whirlpool code FH myself?

Start with these safe checks: Press Pause/Cancel twice and unplug the washer. Make sure both faucets are fully on, the inlet hoses aren't kinked, and the screens at the hose connections aren't clogged. If the supply is fine, schedule service.

When should I call a technician for code FH?

If the supply is fine, schedule service. Unplug it or switch the breaker off before you remove any panel. Don't test or replace wiring, control boards, heating elements or motors under power. If you see scorching, smell burning, or the breaker trips again, leave it off and call a qualified appliance technician or electrician.

Whirlpool Washer Error Code FH: No water supply

What FH means

There's a water inlet problem: no water or not enough water.

Likely causes

Faucets not fully open
Clogged inlet hose screens
Kinked hoses

Safe first checks

Press Pause/Cancel twice and unplug the washer.
Make sure both faucets are fully on, the inlet hoses aren't kinked, and the screens at the hose connections aren't clogged.

When to stop

If the supply is fine, schedule service.

Checked against: Whirlpool Product Help: FH front load washer. Codes can differ by model and year, so confirm with your owner's manual.